)design circuit blocks as follows using common resistors and capacitors (i. e., 10 µf caps, 10 kω resistors, etc.): passive hp filter: break frequency of about .5 hz (~3 radians/sec) active lp filter: break frequency of about 100 hz (~630 radians/sec) instrumentation amplifier with input stage amplification of > 50 and difference stage amplification of greater than > 20.

Liquid flows at steady state at a rate of 2 lb/'s through a pump, which operates to raise the elevation of the liquid 100 ft from control volume inlet to exit. the liquid specific enthalpy at the inlet is 40.09 btu/lb and at the exit is 40.94 btub. the pump requires 3 btu/s of power to operate. if kinetic energy effects are negligible and gravitational acceleration is 32.174 tt/s, the heat transfer rate associated with this steady state process is most closely 1)-2,02 btu/s from the liquid to the surroundings 2)-3.98 btu/s from the surroundings to the liquid. 3)-4.96 btu/s from the surroundings to the liquid. 4)-1.04 btu/s from the liquid to the surroundings.