Engineering
Engineering, 19.11.2019 06:31, ppoooiyip1589

Use the indirect pattern when you need to soften or delay bad news until after an explanation is given. understanding the four components of the indirect pattern will you craft messages that convey empathy, present reasons, cushion bad news, and close pleasantly. what buffering technique are you using if you show in your opening that you care and are concerned? facts best news understanding

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, genyjoannerubiera
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
image
Engineering, 04.07.2019 18:10, oshawn108
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg. k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m. k
Answers: 2
image
Engineering, 04.07.2019 18:20, kendrawalraven
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
image
Engineering, 04.07.2019 19:10, gabigalvis1091
What is the main objective of using reheat rankine cycle?
Answers: 3
Do you know the correct answer?
Use the indirect pattern when you need to soften or delay bad news until after an explanation is giv...

Questions in other subjects:

Konu
Chemistry, 06.02.2021 20:40
Konu
Mathematics, 06.02.2021 20:40