Engineering, 19.11.2019 05:31, Abdul111

Aﬂat-plate collector with one cover is inclined at a slope of 50◦ from the horizontal. the plate temperature is 100◦c and its emittance is 0.10. the cover temperature is 31.5◦c, and the (glass) cover has an emittance of 0.88. the plate-cover spacing is 25mm. a calculate the radiative transfer from plate to cover. b calculate a radiation heat transfer coefﬁcient from plate to cover. c calculate the convective transfer from plate to cover. d given an effective surrounding temperature of 10◦c, estimate the net radiative exchange between the cover and the surroundings.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 19:30, 10040813

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line

Answers: 3

continue

Engineering, 04.07.2019 18:10, keigleyhannah30

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

continue

Engineering, 04.07.2019 18:10, bckyanne3

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

continue

Engineering, 04.07.2019 18:20, samantha636

Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k

Answers: 2

continue

Do you know the correct answer?

Aﬂat-plate collector with one cover is inclined at a slope of 50◦ from the horizontal. the plate tem...