Engineering, 19.11.2019 04:31, marianesabrinap20

The town of pittsford, ny has requested proposals for a new drinking water plant. the design flow for the plant is 0.1065m3/s. the average annual water temperature is 19°c. the following design assumptions for a rapid-mix tankhave been made: a. number of tanks: 1 (with 1 backup spare) b. tank configuration: circular with liquid depth = 2 x diameter c. retention time: 10sd. velocity gradient: 800s-1 e. impeller type: turbine, 6 flat blades, kt = np = 5.7 f. available impeller diameters: 0.45, 0.60, and 1.2m cee2712/3711g. assume b =h/3 (b=water depth below impeller)design the rapid mix system by providing the following: (a) power input in kw(b) tank dimensions in m(c) impeller diameter in m(d) rotational speed of the impeller in rpm.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, makaylashrout77

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

continue

Engineering, 04.07.2019 18:10, Tyrant4life

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

Answers: 1

continue

Engineering, 04.07.2019 18:10, Candi9697

A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.

Answers: 2

continue

Engineering, 04.07.2019 18:20, Doogsterr

For each of the following process: a) sketch the p-v diagram, b)sketch t-s diagram, c) sketch t-v diagram, d) sketch the boundary work on one of the diagrams (a, b or c) and e) sketch the reversible heat transfer on one of the diagrams (a, b or c): 1- isobaric process from compressed liquid to superheated vapor 2- isothermal process from compressed liquid to superheated vapor 3- isentropic process from compressed liquid to superheated vapor

Answers: 3

continue

Do you know the correct answer?

The town of pittsford, ny has requested proposals for a new drinking water plant. the design flow fo...