Engineering, 18.11.2019 23:31, kalo1023

5-28 the following data are from the u. s. epa ap-42 emission factors for malt beverages. for a steam-heated brewers grain dryer, co 5 0.22, co2 5 53, and voc (ethanol) 5 0.73. the units for the emission factors in the epa tables are in lbs of pollutant per 1,000 barrels (bbl). a brewery produces about 7 million barrels of product per year. estimate the emissions of

(a) kg of carbon monoxide per year from fermenter venting
(b) kg of carbon dioxide per year from fermenter venting
(c) kg of vocs (ethanol) per year from fermenter venting

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, brooklyn674

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

continue

Engineering, 04.07.2019 18:10, settasav9641

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

continue

Engineering, 04.07.2019 18:10, agpraga23ovv65c

Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.

Answers: 2

continue

Engineering, 04.07.2019 18:20, kodyclancy

Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero

Answers: 2

continue

Do you know the correct answer?

5-28 the following data are from the u. s. epa ap-42 emission factors for malt beverages. for a stea...