Engineering
Engineering, 18.11.2019 22:31, whatistheinternetpas

Felix, a 54-year-old masonry contractor, has been complaining for the past three months about increasing arm weakness and that it is becoming more difficult to pick up and use his tools. he has recently been stumbling at his work site and his speech is, at times, difficult to understand because of poor word choices. he has also had worsening memory and forgot how to install a granite lamp post at a client’s house. the last straw that forced him to make a neurology appointment was when he dropped his hammer drill onto his right foot and fractured the cuboid and navicular bones.

a neurological examination uncovered the following results:

bilateral rapid eye movement at rest

slurred speech

difficulty swallowing

overshoot on finger-to-nose test

failed romberg balance test

student questions:

1. identify three regions of the central nervous system that may be compromised.

2. connect three remarkable signs/symptoms with the proper clinical terms.

3. provide a primary diagnosis and a possible lesion type (e. g. what anatomical problem is causing the

4. present one treatment option for this patient. include a brief explanation.

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, bckyanne3
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
image
Engineering, 04.07.2019 18:10, lowkeyqueenk
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
image
Engineering, 04.07.2019 18:10, Strick1530
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
image
Engineering, 04.07.2019 18:10, namira16
Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.
Answers: 2
Do you know the correct answer?
Felix, a 54-year-old masonry contractor, has been complaining for the past three months about increa...

Questions in other subjects:

Konu
Mathematics, 02.02.2022 01:00