Engineering, 17.11.2019 19:31, Juli8283
Asheet of paper 90 cm-by-66 cm is made into an open box (i. e. there's no top), by cutting x-cm squares out of each corner and folding up the sides. find the value of x that maximizes the volume of the box. give your answer in the simplified radical form. x = is the max.
Answers: 3
Engineering, 04.07.2019 18:10, bckyanne3
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 19:10, batmanmarie2004
Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.
Answers: 2
Asheet of paper 90 cm-by-66 cm is made into an open box (i. e. there's no top), by cutting x-cm squa...
Spanish, 20.10.2020 14:01
Mathematics, 20.10.2020 14:01
English, 20.10.2020 14:01
Spanish, 20.10.2020 14:01