Engineering, 16.11.2019 05:31, summerkilby8

Aheated long cylindrical rod is placed in a cross flow of air at 20°c (1 atm) with velocity of 10 m/s. the rod has a diameter of 5 mm and its surface has an emissivity of 0.95. if the surrounding temperature is 20°c and the heat flux dissipated from the rod is 17000 w/m2, determine the surface temperature of the rod. evaluate the air properties at 70°c. the properties of air (1 atm) at 70°c are k

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, brooklyn674

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

continue

Engineering, 04.07.2019 18:10, ijohnh14

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

continue

Engineering, 04.07.2019 18:20, CelesteN64

Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options

Answers: 2

continue

Engineering, 04.07.2019 19:20, mads000

Determine (a) the maximum thermal efficiency of reversible power cycles operating between a hot reservoir at 1000°c and a cold reservoir at 200°c and (b) the maximum cops for reversible refrigeration and heat pump cycies, respectively, between 28°c and 14°c.

Answers: 1

continue

Do you know the correct answer?

Aheated long cylindrical rod is placed in a cross flow of air at 20°c (1 atm) with velocity of 10 m/...