Engineering, 16.11.2019 05:31, LuvieAnn1886
Aseries of drained triaxial tests was carried out on specimens of a sand prepared at the same porosity (i. e. same dry density) and the following results were obtained at failure. determine the value of the angle of shearing resistance ’. all-round pressure (kn/m2 ) 100 200 400 800 principal stress difference (kn/m2 ) 452 908 1810 3624
Answers: 2
Other questions on the subject: Engineering
Engineering, 03.07.2019 14:10, makaylashrout77
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
Engineering, 03.07.2019 14:10, volleyballfun24
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 03.07.2019 23:20, abbz13
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
Do you know the correct answer?
Aseries of drained triaxial tests was carried out on specimens of a sand prepared at the same porosi...
Questions in other subjects:
Mathematics, 01.04.2021 21:40
Mathematics, 01.04.2021 21:40
