Engineering, 16.11.2019 02:31, husamramadan83

Consider a system with transfer function h(s) = s +5 s2 +5s +6 find the (zero-state) response for the following inputs: (a) xa(t) = e−3t u(t) (b) xb(t) = e−4t u(t) (c) xc(t) = e−4(t−5) u(t −5) (d) xd(t) = e−4(t−5) u(t) (e) xe(t) = e−4t u(t −5) assuming that the system h(s) is controllable and observable, (f) write the differential equation relating the output y(t) to the input x(t)

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, lerasteidl

Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?

Answers: 3

continue

Engineering, 04.07.2019 18:10, 0436500

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.

Answers: 1

continue

Engineering, 04.07.2019 18:20, ashleyjaslin

Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.

Answers: 3

continue

Engineering, 04.07.2019 18:20, luisgonz5050

Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k

Answers: 3

continue

Do you know the correct answer?

Consider a system with transfer function h(s) = s +5 s2 +5s +6 find the (zero-state) response for th...