Engineering, 16.11.2019 01:31, emojilover8188

In an undrained triaxial test on a soil specimen the constant cell pressure was 200 kpa. when the piston load was 320 n the length of the specimen was 65 mm. if the original length and diameter of the specimen were 78mm and 38mm respectively, determine at the above piston load:
a) cross-sectional area of the specimen.
b) deviator stress.
c) major principal total stress.
d) maximum shear stress.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, makaylashrout77

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

continue

Engineering, 04.07.2019 18:10, hadellolo8839

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:10, yasminothman02

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

continue

Engineering, 04.07.2019 18:10, winterblanco

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

continue

Do you know the correct answer?

In an undrained triaxial test on a soil specimen the constant cell pressure was 200 kpa. when the pi...