Engineering, 15.11.2019 06:31, hartzpeyton136
8.6 wp water is the working fluid in an ideal rankine cycle. steam enters the turbine at 1400 lbf/in.2 and 1000°f. the condenser pressure is 2 lbf/in.2 the net power output of the cycle is 1 × 109 btu/h. cooling water experiences a temperature increase from 60°f to 76°f, with negligible pressure drop, as it passes through the condenser.
determine for the cycle
a. the mass flow rate of steam, in lb/h.
b. the rate of heat transfer, in btu/h, to the working fluid passing through the steam generator.
c. the thermal efficiency.
d. the mass flow rate of cooling water, in lb/h.
Answers: 1
Other questions on the subject: Engineering
Engineering, 03.07.2019 14:10, kayabwaller4589
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
Engineering, 04.07.2019 18:20, AnonymousLizard52303
A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.
Answers: 3
Engineering, 04.07.2019 19:20, holaadios222lol
Apiping systems consists of 6 m of 6-std type k and 12 m of 4-std type k, both drawn copper tubing. the system conveys ethylene glycol at a rate of 0.013 m3/s. the pressure drop across the system is to be calculated. there are two 90° elbows in the 6-in pipe, a reduction from the 6-in pipe to the 4-in pipe and four 90° elbows in the 4-in pipe. all fittings are soldered (same as flanged) and regular. the inlet and outlet of the system are at the same height.
Answers: 1
Do you know the correct answer?
8.6 wp water is the working fluid in an ideal rankine cycle. steam enters the turbine at 1400 lbf/in...
Questions in other subjects:
Social Studies, 23.03.2021 23:40
