Engineering, 15.11.2019 04:31, jasondesatnick

Avertical cylinder (fig. p3.227) has a 61.18-kg piston locked with a pin, trapping 10 l of r-410a at 10◦c with 90% quality inside. atmospheric pressure is 100 kpa, and the cylinder cross-sectional area is 0.006 m2. the pin is removed, allowing the piston to move and come to rest with a final temperature of 10◦c for the r-410a. find the final pressure, the work done, and the heat transfer for the r-410a.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, cowgyrlup124

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

continue

Engineering, 03.07.2019 14:10, kayabwaller4589

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

continue

Engineering, 03.07.2019 14:10, makaylashrout77

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

continue

Engineering, 03.07.2019 15:10, breannaasmith1122

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

Answers: 1

continue

Do you know the correct answer?

Avertical cylinder (fig. p3.227) has a 61.18-kg piston locked with a pin, trapping 10 l of r-410a at...