Engineering, 15.11.2019 01:31, jeanieb

Horizontal shaft paddle wheels are used in a tapered flocculation basin comprised of three compartments. the power input to the paddles progressively decreases through the basin with the first compartment paddle driving with 186 w of power, the second compartment paddle with 30.0 w of power, and the final compartment paddle with 7.50 w of power. each paddle wheel mixes a compartment 4.17 m deep, 3.75 m wide, and 4.17 m long. the normal water temperature is 15 ? c, and average flow rate is 16,000 m3/d.

(a) what is the mixing intensity in each of the three compartments?

(b) if the influent water contains a nearly monodisperse (single-sized) particle size distribution of 20.0 ? m particles with a concentration of 1.8 × 105 particles/ml, what will be the average number of singlet particles in an aggregate leaving the first compartment?

note that viscosity of water is 0.00114 kg/m? s.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, yasminothman02

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

continue

Engineering, 04.07.2019 18:10, lillygrl100

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

Answers: 3

continue

Engineering, 04.07.2019 18:10, kevin72836

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

continue

Engineering, 04.07.2019 18:10, namira16

Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.

Answers: 2

continue

Do you know the correct answer?

Horizontal shaft paddle wheels are used in a tapered flocculation basin comprised of three compartme...