Engineering
Engineering, 14.11.2019 05:31, ethanh7755

2.19 for a k+βˆ’clβˆ’ ion pair, attractive and repulsive energies ea and er, respectively, depend on the distance between the ions r, according to e a = βˆ’ 1.436 r e r = 5.86 Γ— 10 βˆ’ 6 r 9 ea=βˆ’1.436rer=5.86Γ—10βˆ’6r9 for these expressions, energies are expressed in electron volts per k+βˆ’clβˆ’ pair, and r is the distance in nanometers. the net energy en is just the sum of the preceding two expressions. (a) superimpose on a single plot en, er, and ea versus r up to 1.0 nm. (b) on the basis of this plot, determine (i) the equilibrium spacing r0 between the k+ and clβˆ’ ions, and (ii) the magnitude of the bonding energy e0 between the two ions.

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, koolgurl2003
Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180Β°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in Β°r, as the water flows through the pump.
Answers: 1
image
Engineering, 04.07.2019 18:10, meganwintergirl
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
image
Engineering, 04.07.2019 18:10, siri5645
At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.
Answers: 1
image
Engineering, 06.07.2019 03:10, tyheath42
Steel balls 12 mm in diameter are annealed by heating to 1150 k and then slowly cooled to 400 k in an air att 325 k and h -20 w/m2 k. assume the properties of the steel to be k- 40 w/m k, p 7800 kg/m3, and cp 600 j/kg k. a. determine whether lumped system method can be used to analyze this problem and if so why" b. determine the time required for the cooling process. c. determine the total amount of heat lost from each ball to the ambient air
Answers: 1
Do you know the correct answer?
2.19 for a k+βˆ’clβˆ’ ion pair, attractive and repulsive energies ea and er, respectively, depend on the...

Questions in other subjects: