Engineering, 14.11.2019 05:31, Loveland56
Afurnace that has a 40-cm 3 40-cm glass window can be considered to be a blackbody at 1200 k. if the transmissivity of the glass is 0.7 for radiation at wave- lengths less than 3 mm and zero for radiation at wavelengths greater than 3 mm, determine the fraction and the rate of radiation coming from the furnace and transmitted through the window.
Answers: 2
Other questions on the subject: Engineering
Engineering, 03.07.2019 15:10, theamandawhite
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 03.07.2019 23:20, abbz13
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
Engineering, 04.07.2019 18:10, bckyanne3
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Do you know the correct answer?
Afurnace that has a 40-cm 3 40-cm glass window can be considered to be a blackbody at 1200 k. if the...
Questions in other subjects:
Chemistry, 25.02.2021 21:10
History, 25.02.2021 21:10
