An esp must treat 300,000 acfm with 99% efficiency.
a) for an effective drift velocity of 0.25...
Engineering, 13.11.2019 20:31, sonaihriley
An esp must treat 300,000 acfm with 99% efficiency.
a) for an effective drift velocity of 0.25 ft/sec, calculate the required collection area.
b) assuming the plates are 15 feet tall and 6 feet long, and are arranged with three mechanical fields, calculate the aspect ratio.
c) estimate the total number of plates in this esp.
d) estimate the cost of this esp (f. o.b. manufacturer and tic), both in 1998 dollars, then in 2002 dollars. (i_1998: = 1061.9; i_2008: = 1449.3).
e) calculate the fan power if the average pressure drop is 0.6 in. h_2o and the fan/motor efficiency is 70%.
Answers: 3
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:20, aly95
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
Engineering, 06.07.2019 02:30, emiller6462
Plot schematically the tensile stress versus strain curves for a typical thermoplastic material at a temperature below its glass transition temperature (tg and at a temperature above its tg, respectively. do the same for a typical thermosetting material. list in a table any differences or similarities between the two materials at t> tg and t < tg, respectively, and relate them to the structures of the two types of polymers
Answers: 3
Do you know the correct answer?
Questions in other subjects:
English, 25.02.2020 02:54
History, 25.02.2020 02:54
