Engineering, 13.11.2019 19:31, eddie828

Athin–walled cylindrical pressure vessel of inner radius r and thickness t r is subjected to an internal pressure p. the pressure vessel is made from steel which has elastic material constants e = 200 gpa and ν = 0.30. if the vessel has a length ` = 3 m, an inner radius of r = 0.65 m, and a wall thickness t = 15 mm, determine the following items for a pressure p = 25 mpa. assume that elongation is positive and contraction is negative.
(a) determine the hoop (circumferential) strain in the pressure vessel.
(b) determine the axial (longitudinal) strain in the pressure vessel.
(c) determine change in the circumference of the pressure vessel caused by the internal pressure.
(d) determine the change in the outer diameter of the pressure vessel caused by the internal pressure.
(e) determine the change in the length of the pressure vessel caused by the internal pressure.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, theamandawhite

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

continue

Engineering, 04.07.2019 18:10, QueenLife4869

Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.

Answers: 3

continue

Engineering, 04.07.2019 19:10, phantomlizz3233

In general, how do thermosetting plastics compare to thermoplastics in mechanical and physical properties?

Answers: 3

continue

Engineering, 04.07.2019 19:10, jennymares

Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m

Answers: 1

continue

Do you know the correct answer?

Athin–walled cylindrical pressure vessel of inner radius r and thickness t r is subjected to an inte...