Engineering, 13.11.2019 06:31, dbhuggybearow6jng

Arigid, well-insulated tank is connected to two valves. one valve goes to a steam line that has steam at 1000 kpa and 600k, and the other to a vacuum pump. both valves are initially closed. then the valve to the vacuum pump is opened, the tanks evacuated, and the valve is closed. next the valve to the steam line is opened so that the steam enters the evacuated tank very slowly until the pressure in the tank equals the pressure in the steam line. calculate the final temperature of steam in the tank.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, EmilySerna

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

continue

Engineering, 04.07.2019 18:10, namira16

Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.

Answers: 2

continue

Engineering, 04.07.2019 18:10, nandalabella06

True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure

Answers: 2

continue

Engineering, 04.07.2019 18:20, myahlit84

Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false

Answers: 3

continue

Do you know the correct answer?

Arigid, well-insulated tank is connected to two valves. one valve goes to a steam line that has stea...