For the data give below, calculate and plot pressure traverse in the tubing string using the hagedorn-brown correlation tubing shoe depth: 6,000 ft tubing inner diameter: 1.995 in. oil gravity: 30api oil viscosity: 2 cp production glr: 500 scf/bbl gas-specific gravity: 0.65 air=1 flowing tubing head pressure 100 psi flowing tubing head temperature 80f flowing temperature at tubing shoe: 140f liquid production rate: 1,500 stb/day water cut: 20% interfacial tension: 30 dynes/cm specific gravity of brine: 1.05 h2o=1 also construction the tpr curve for the well.

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way