Engineering
Engineering, 12.11.2019 23:31, minecrafter3882

Consider a flat rolling operation of an aluminum 1100-0 workpiece. the initial thickness of the workpiece is 0.25 in, width is 8 in and the roll radius is 10 in. if the workpiece thickness is reduced by 0.02 inches per pass, findthe roll force for each of the first three passes: h1=0.23in, h2=0.21in; h3=0.19in. assume an ideal rolling operation (i. e. friction is zero) and that deformation follows plane strain assumptions. there’s an example rolling calculation on the canvas lab website for 3221.

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, BardiFan
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
image
Engineering, 04.07.2019 18:10, aaliyah80
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
image
Engineering, 04.07.2019 18:20, alexis9263
Have a greater impact on maintenance productivity than any other support group. (clo5) a)-the top management b)-inventory and purchasing c)-sub-contracting d)-cmms
Answers: 2
image
Engineering, 04.07.2019 18:20, mjcbs21
What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.
Answers: 3
Do you know the correct answer?
Consider a flat rolling operation of an aluminum 1100-0 workpiece. the initial thickness of the work...

Questions in other subjects:

Konu
Mathematics, 03.04.2020 18:21
Konu
Business, 03.04.2020 18:22