Engineering, 11.11.2019 23:31, pettitchristy1
It rains during the construction of a building and water fills a recently excavated pit to a depth, h=0.5m. in order to continue construction, the water must first be pumped out of the pit. a hose with a length of l=50m, a diameter of d=2.5*10-2 m, and a surface roughness of e=5.0*10-5 m is attached to a pump. note that the kinematic viscosity of the water is n=1.005*10-6 m2 /s and the density is r=1000 kg/m3 .
Answers: 1
Engineering, 04.07.2019 18:10, keigleyhannah30
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10, 0436500
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 19:10, gabigalvis1091
What is the main objective of using reheat rankine cycle?
Answers: 3
It rains during the construction of a building and water fills a recently excavated pit to a depth,...
Mathematics, 03.11.2021 01:30
World Languages, 03.11.2021 01:30