Engineering, 10.11.2019 06:31, ninaaforever
What is the magnitude of the maximum stress that exists at the tip of an internal crack having a radius of curvature of 3.5 × 10-4 mm (1.378 × 10-5 in.) and a crack length of 5.5 × 10-2 mm (2.165 × 10-3 in.) when a tensile stress of 220 mpa (31910 psi) is applied?
Answers: 3
Engineering, 04.07.2019 03:10, lauriepdx17
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
Engineering, 04.07.2019 16:10, TheOriginalMeyah
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10, DestyHilBan1183
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:10, lerasteidl
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
What is the magnitude of the maximum stress that exists at the tip of an internal crack having a rad...
Mathematics, 30.05.2020 16:59
History, 30.05.2020 17:00