Engineering, 10.11.2019 05:31, coricori8

Metal plates (k = 185 w/m · °c; density = 2800 kg/m3; cp = 900 j/kg °c) with a thickness of 1 cm are being heated in an oven for 2 minutes. air in the oven is maintained at 850°c with a convection heat transfer coefficient of 250 w/m2 · °c. if the initial temperature of the plates is 25°c, determine the temperature of the plates when they are removed from the oven. will you show each step fully so i can see exactly how you go the answer. i. e lc=v/as. i could not figure out how to get the volume or the area with the information provided.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 16:10, TheOriginalMeyah

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Answers: 2

continue

Engineering, 04.07.2019 18:10, lerasteidl

Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?

Answers: 3

continue

Engineering, 04.07.2019 18:10, ijohnh14

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

continue

Engineering, 04.07.2019 18:10, mamasbug4285

An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0

Answers: 3

continue

Do you know the correct answer?

Metal plates (k = 185 w/m · °c; density = 2800 kg/m3; cp = 900 j/kg °c) with a thickness of 1 cm a...