Design an active bandpass filter subject to the following constraints:
•cascade a first...
Engineering, 08.11.2019 23:31, zulfiquer5541
Design an active bandpass filter subject to the following constraints:
•cascade a first-order active lowpass filter, a first-order active highpass filter and possibly aninverting amplifier.
•fc1= 300hz and fc2= 3khz.
•maximum gain (gain at f0) in the passband 1 shall be 20db
•using standard resistor values available in the lab room.
•draw the schematic diagram of your finished design.
Answers: 3
Engineering, 04.07.2019 18:10, Candi9697
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
Engineering, 04.07.2019 18:20, rocio5649
Amixture of slurry and mud is to be pumped through a horizontal pipe of diameter 500 mm. the fluid behaves as a bingham plastic with a yield stress of 30 pa and viscosity 0.04 pa. s. describe the effects of the shear stress through a transverse section of the pipe by plotting the variation in shear stress and velocity profile: (i) just before the slurry starts to move (ii) as the slurry flows when the pressure gradient is double that in part (i)
Answers: 3
Mathematics, 20.10.2021 07:40
Mathematics, 20.10.2021 07:40
Mathematics, 20.10.2021 07:40
History, 20.10.2021 07:40
History, 20.10.2021 07:40