Engineering, 08.11.2019 21:31, goldenblobslime
Astainless-steel specimen from the same material characterized up above, was formed into a rectangular cross-section of dimensions (3/4 in. x 1/8 in). the specimen is subject to a tensile force of 72,000 n.
(a) determine the elastic and plastic strain values when the specimen is subject to the 72,000 n tensile load.
(b) if the original length is 24 in., what will be its final length after the 72,000 n tensile load is released
Answers: 3
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, siri5645
At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.
Answers: 1
Engineering, 04.07.2019 18:10, 0436500
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20, cxttiemsp021
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
Do you know the correct answer?
Astainless-steel specimen from the same material characterized up above, was formed into a rectangul...
Questions in other subjects:
