Engineering, 08.11.2019 05:31, door9817
Arow of rectangular baffle blocks (0.4m high, 0.6m wide and 1.0m long) are to be installed in a 12m wide stilling basin to aid energy dissipation after a dam spillway. the blocks are spaced uniformly 0.4m apart across the spillway exit. the drag force d in each block is given by d = 0.5cd\small \rhov 2afb, with afb as the frontal area of the block and cd as the effective drag coefficient = 0.25 and v as the upstream velocity. if the flow rate is 150m3 /s and the upstream depth is 2m, determine the downstream water depth and energy loss for the two cases;
(a) blocks not installed (energy dissipated as a hydraulic jump downstream)
(b) blocks installed (momentum theory, considering drag forces)
(c) summarize a comparison between both scenarios
Answers: 3
Other questions on the subject: Engineering
Engineering, 03.07.2019 15:10, breannaasmith1122
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
Engineering, 04.07.2019 18:10, settasav9641
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10, ijohnh14
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Do you know the correct answer?
Arow of rectangular baffle blocks (0.4m high, 0.6m wide and 1.0m long) are to be installed in a 12m...
Questions in other subjects:
Mathematics, 20.10.2019 16:10
Mathematics, 20.10.2019 16:10
