Engineering, 08.11.2019 03:31, carcamophillip

Asteel plate 0.1 meters thick is initially at a uniform temperature of 200 °c. the steel plate is to be annealed in a gas furnace by heating the plate to a minimum temperature of 550 °c. the temperature of the combustion products is 800 °c and the convection coefficient is 250 w/m2k. both sides of the plate are exposed to the convection heat transfer. determine the time the steel plate should reside in the furnace. (plate: r = 7830 kg/m3; cp = 550 j/kgk; k = 48 w/m*k)

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, oliviasoreo92

Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa

Answers: 1

continue

Engineering, 04.07.2019 18:10, tobyhollingsworth178

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

Answers: 2

continue

Engineering, 04.07.2019 18:20, 21megoplin

How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s

Answers: 2

continue

Engineering, 04.07.2019 19:10, jimena15

10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.

Answers: 2

continue

Do you know the correct answer?

Asteel plate 0.1 meters thick is initially at a uniform temperature of 200 °c. the steel plate is to...