Engineering
Engineering, 07.11.2019 05:31, 01222002

Consider a low-speed open-circuit subsonic wind tunnel. the tunnel is turned on, and the pressure difference between the inlet (the settling chamber) and the test section is read as a height difference of 10 cm on a u-tube mercury manometer. (the density of liquid mercury is 1.36 x 104 kg/m3.) assume that a pitot tube is inserted into the test-section flow of the wind tunnel. the tunnel test section is completely sealed from the outside ambient pressure. calculate the total pressure measured by the pitot tube, assuming the static pressure at the tunnel inlet is atmospheric. (round the final answer to two decimal places.) the total pressure measured by the pitot tube is * 105 n/m2

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 23:20, abbz13
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
image
Engineering, 04.07.2019 18:10, settasav9641
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
image
Engineering, 04.07.2019 18:20, ashleyjaslin
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
image
Engineering, 04.07.2019 19:10, LadyHolmes67
Apressure vessel with an r/t 20 cannot be treated as thin walled vessel. a)-trune b)- false
Answers: 3
Do you know the correct answer?
Consider a low-speed open-circuit subsonic wind tunnel. the tunnel is turned on, and the pressure di...

Questions in other subjects:

Konu
Mathematics, 22.01.2021 19:10