Engineering
Engineering, 07.11.2019 04:31, medellincolombia99

Astandard bod test is run using seeded dilution water. in one bottle, the waste sample is mixed with seeded dilution water given a dilution of 1: 30. another bottle, the blank, contains just seeded dilution water. both bottles begin the test with do at the saturation value of 9.2 mg/l. after five days, the bottle containing waste has do equal to 2.0 mg/l, while that containing just seeded dilution waterhas a do equal to 8.0 mg/l. find the five-day bod (mg/l

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, kayabwaller4589
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
image
Engineering, 04.07.2019 18:10, DestyHilBan1183
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
image
Engineering, 04.07.2019 18:10, bckyanne3
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
image
Engineering, 04.07.2019 18:10, Fahaddie
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
Do you know the correct answer?
Astandard bod test is run using seeded dilution water. in one bottle, the waste sample is mixed with...

Questions in other subjects:

Konu
Social Studies, 27.03.2020 03:12