Engineering, 06.11.2019 20:31, igtguith
Adisplacement transducer has the following specifications:
linearity error: ±0.25% reading
drift: ±0.05% /℃ reading
sensitivity error: ±0.25% reading
excitation : 10-25 vdc output: 0-5 vdc
range: 0-5 cm
the transducer output is to be indicated on a voltmeter having a stated accuracy of ±0.1% reading with a resolution of 10 μv. the system is to be used at room temperature , which can vary by ±10℃. estimate an uncertainty in a normal displacement of 2 cm at design stage. assume 95% confidence.
Answers: 2
Engineering, 04.07.2019 18:10, katelynn73
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
Engineering, 04.07.2019 19:10, pjgolden04
How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?
Answers: 2
Engineering, 06.07.2019 03:20, carrietaylor234
Avertical steel rod of length 2.0 m and diameter 25 mm is rigidly fixed at its upper end and has a flange at its lower, free, end. what will be the maximum stress produced in the rod when a load of 20 kn is applied, (a) gradually to the lower end, (b) suddenly to the lower end, (c) by a collar falling from a height of 50 mm on to the flange?
Answers: 3
Adisplacement transducer has the following specifications:
linearity error: ±0.25% rea...
linearity error: ±0.25% rea...
Mathematics, 14.09.2020 19:01
Mathematics, 14.09.2020 19:01
Mathematics, 14.09.2020 19:01
Mathematics, 14.09.2020 19:01
English, 14.09.2020 19:01
French, 14.09.2020 19:01
Mathematics, 14.09.2020 19:01
Geography, 14.09.2020 19:01
Mathematics, 14.09.2020 19:01
Mathematics, 14.09.2020 19:01