Engineering, 05.11.2019 02:31, lazarus10

Agas mixture contains 30.0 mole% h2o(v) and 70.0 mole% n2. the gas temperature and absolute pressure at the start of each of the three parts of this problem are 75°c and 900.0 mm hg. ideal gas behavior may be assumed in every part of this problem. a. if some of the gas mixture is put in a cylinder and slowly cooled at constant pressure, at what temperature would the first drop of liquid form? °c b. if a 30.0 liter flask is filled with some of the gas mixture and sealed, and 70.0% of the water vapor in the flask is condensed, what volume would be occupied by the liquid water? cm3 what would be the system temperature? °c c. if the gas mixture is stored in a rigid-walled cylinder and a low-pressure weather front moves in and the barometric (atmosopheric) pressure drops from 760 mm hg to 720.0 mm of hg, what would be the new gauge pressure in the cylinder? mm hg

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 08:10, doggo242

Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed

Answers: 1

continue

Engineering, 04.07.2019 18:10, koolgurl2003

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Answers: 1

continue

Engineering, 04.07.2019 18:20, hayleymckee

Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent

Answers: 2

continue

Engineering, 04.07.2019 18:20, kodyclancy

Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero

Answers: 2

continue

Do you know the correct answer?

Agas mixture contains 30.0 mole% h2o(v) and 70.0 mole% n2. the gas temperature and absolute pressure...