Engineering, 04.11.2019 22:31, dayday0

The 150-mm-thick wall of a gas-fired furnace is con- structed of fireclay brick (k = 1.5 w/m⋅k, rho = 2600 kg/m3, cp = 1000 j/kg ⋅ k) and is well insulated at its outer surface. the wall is at a uniform initial tempera- ture of 20°c, when the burners are fired and the inner surface is exposed to products of combustion for which t[infinity] = 950°c and h = 100 w/m2 ⋅ k. (a) how long does it take for the outer surface of the wall to reach a temperature of 750 degree c?

(b) plot the temperature distribution in the wall at the foregoing time.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, bryneosburn

Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned

Answers: 2

continue

Engineering, 04.07.2019 18:10, heidiburgos1own6c0

Fluids at rest possess no flow energy. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:10, ijohnh14

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

continue

Engineering, 04.07.2019 18:20, ashleyjaslin

Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.

Answers: 3

continue

Do you know the correct answer?

The 150-mm-thick wall of a gas-fired furnace is con- structed of fireclay brick (k = 1.5 w/m⋅k, rho...