Engineering, 02.11.2019 05:31, s900005

Asolid steel sphere (aisi 1010), 300 mm in diameter, is coated with a dielectric material layer of thickness 2 mm and thermal conductivity 0.04 w/m middot k. the coated sphere is initially at a uniform temperature of 500degreec and is suddenly quenched in a large oil bath for which tinfinity = 100degreec and h = 3300 w/m2 middot k estimate the time required for the coated sphere temperature to reach 140degreec. hint: neglect the effect of energy storage in the dielectric material, since its thermal capacitance (pcv) is small compared to that of the steel sphere.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, aliceohern

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Answers: 3

continue

Engineering, 04.07.2019 18:10, genyjoannerubiera

Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)

Answers: 1

continue

Engineering, 04.07.2019 18:20, kodyclancy

Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero

Answers: 2

continue

Engineering, 04.07.2019 19:10, kelseiroll9759

Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.

Answers: 1

continue

Do you know the correct answer?

Asolid steel sphere (aisi 1010), 300 mm in diameter, is coated with a dielectric material layer of t...