Engineering, 02.11.2019 03:31, galfaro19

You have a constant area frictionless combustion chamber. at the entrance to the combustion chamber the mach number is 0.2 and the stagnation temperature is 675 k. the mach number is 0.47 at the exit to the combustion chamber.  = 1.4 and cp = 1 kj/kgk. a) what is the stagnation temperature at the exit of the combustion chamber? b) what is the ratio of the exit stagnation pressure to the entrance stagnation pressure? c) how high can the stagnation temperature rise in the combustion chamber before the flow reaches m = 1?

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 19:30, 10040813

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line

Answers: 3

continue

Engineering, 04.07.2019 18:10, mm016281

What difference(s) did you notice using a pneumatic circuit over hydraulic circuit. explain why the pneumatic piston stumbles when it hits an obstacle.

Answers: 2

continue

Engineering, 04.07.2019 18:10, niyawilliams23

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

continue

Engineering, 04.07.2019 18:10, Tyrant4life

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

Answers: 1

continue

Do you know the correct answer?

You have a constant area frictionless combustion chamber. at the entrance to the combustion chamber...