Engineering, 01.11.2019 04:31, kjdskcd4024

Agas is compressed in a piston-cylinder assembly from p1= 2 bar to p2= 8 bar, v2= 0.02 m^3 in a process during which the relation between pressure and volume is pv^1.3= constant. the mass of the gas is 0.2 kg. if the specific internal energy of the gas increases by 50 kj/kg during the process, determine the heat transfer, in kj. kinetic and potential energies are negligible.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, alyssabailey7545

Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines

Answers: 1

continue

Engineering, 04.07.2019 18:10, Tyrant4life

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

Answers: 1

continue

Engineering, 04.07.2019 18:10, wirchakethan23

Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i. d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.

Answers: 3

continue

Engineering, 04.07.2019 18:10, mamasbug4285

An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0

Answers: 3

continue

Do you know the correct answer?

Agas is compressed in a piston-cylinder assembly from p1= 2 bar to p2= 8 bar, v2= 0.02 m^3 in a proc...