Write a program that allows the user to convert a temperature given in degrees from either celsius to fahrenheit or fahrenheit to celsius. use the following formulas: degrees_c = 5(degrees_f− 32)/9 and degrees_f = (9(degrees_c)/5) + 32) prompt the user to enter a temperature and either a c or c for celsius or an f or f for fahrenheit. convert the temperature to fahrenheit if celsius is entered, or to celsius if fahrenheit is entered. display the result in a readable format. if anything other than c, c, f, or f is entered, print an error message and stop.

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?