Engineering, 31.10.2019 06:31, reetajmahfouz3816

In a manufacturing facility, 2-in-diameter brass balls (k = 64.1 btu/h· ft·°f, rho = 532 lbm/ft3 , and cp = 0.092 btu/lbm·°f) initially at 250°f are quenched in a water bath at 120°f for a period of 2 min at a rate of 120 balls per minute . if the convection heat transfer coefficient is 42 btu/h·ft2 ·f, determine
(a) the temperature of the balls after quenching and (b) the rate at which heat needs to be removed from the water in order to keep its temperature constant at 120°f.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, 19deleonl

Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.

Answers: 2

continue

Engineering, 04.07.2019 18:10, genyjoannerubiera

Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)

Answers: 1

continue

Engineering, 04.07.2019 18:10, demarcuswiseman

Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.

Answers: 3

continue

Engineering, 04.07.2019 18:20, cristykianpour

Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?

Answers: 2

continue

Do you know the correct answer?

In a manufacturing facility, 2-in-diameter brass balls (k = 64.1 btu/h· ft·°f, rho = 532 lbm/ft3 , a...