Engineering
Engineering, 31.10.2019 00:31, sophiaa23

Pioneering behavior analysts were often respected experimental psychologists who successfully and ethically intervened to reduce the suffering of, or dramatically improve the quality of life for, individuals who desperately needed effective treatment. later, other poorly trained, insensitive, and inadequately supervised behavior modifiers were exposed in scandals regarding their disturbing and unethical treatment approaches. today, the first ethical code of the bacb addresses the very high expectations that exist for practicing behavior analysts. this first guideline is titled conduct of a behavior analyst.

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, danksans7011
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
image
Engineering, 04.07.2019 18:10, bckyanne3
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
image
Engineering, 04.07.2019 18:10, samanthabutryn
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
image
Engineering, 04.07.2019 18:10, 0436500
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Do you know the correct answer?
Pioneering behavior analysts were often respected experimental psychologists who successfully and et...

Questions in other subjects:

Konu
Mathematics, 08.12.2021 23:00