Engineering, 30.10.2019 06:31, diane8879

Clearly show and label the following process lines and state-points on a psychrometric chart. (a)outdoor air at 35f dry-bulb temperature and 100 percent relative humidity is heated in a furnace to 100f dry-bulb temperature (b)saturated steam at 200f is then sprayed into the air to increase its relative humidity to 40 percent. (c)the air is then supplied to a space with a condition line having a sensible-heat ratio of 0.7, and the air exits the space at a dry-bulb temperature of 70f.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, EmilySerna

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

continue

Engineering, 03.07.2019 15:10, breannaasmith1122

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

Answers: 1

continue

Engineering, 04.07.2019 18:10, johnthienann58

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

continue

Engineering, 04.07.2019 18:10, Talos02

Burgers vector is generally parallel to the dislocation line. a)-true b)-false

Answers: 2

continue

Do you know the correct answer?

Clearly show and label the following process lines and state-points on a psychrometric chart. (a)out...