Engineering, 30.10.2019 01:31, roudjinapierre214

Abrass alloy is known to have a yield strength of 240 mpa (35,000 psi), a tensile strength of 310 mpa (45,000 psi), and anelastic modulus of 110 gpa (16.0 x 106 psi). a cylindrical specimen of this alloy 15.2 mm (0.60 in) in diameter and 380 mm(15.0 in) long is stressed in tension and found to elongate 19 mm (0.075 on the basis of the information given, is itpossible to compute the magnitude of the load necessary to produce this change in length? if so, calculate the load; if not, explain why.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, aliopqwas

Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.

Answers: 1

continue

Engineering, 04.07.2019 18:10, mirmir62

Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.

Answers: 1

continue

Engineering, 04.07.2019 18:20, hayleymckee

Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent

Answers: 2

continue

Engineering, 04.07.2019 19:10, kimmy6973

What is creep? what is stress relaxation?

Answers: 1

continue

Do you know the correct answer?

Abrass alloy is known to have a yield strength of 240 mpa (35,000 psi), a tensile strength of 310 mp...