Engineering, 29.10.2019 05:31, lupitaca888

Atruncated solid cone is of circular cross section, and its diameter is related to the axial coordinate by an expression of the form d=ax3/2 , where a= 1.0 m-1/2. the sides are well insulated, while the top surface of the cone at x1 is maintained at t1 and the bottom surface at x2 is maintained at t2 . what is the rate of heat transfer across the cone if it is constructed of pure aluminum with x1= 0.075 m, t1= 135°c, x2= 0.225 m, and t2= 20°c? evaluate the properties of aluminum at t¯= 333 k

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 19:10, rayne40

A)-in the process of engineering design, explain the contribution of material selection. b)- explain the procedure of synthesis as is employed in engineering design. c)- is there any relationship between ergonomics and engineering design? explain. d)- safety consideration in engineering design includes human, product and the enviroment . explain how safety will be incorporated into the design?

Answers: 3

continue

Engineering, 06.07.2019 02:30, cofran

A75mm diameter shaft is supported in a journal bearing 75mm long with a diametral clearance of 0. 1mm. it supports a radial load of 1000 n and is lubricated with sae 50 oil at 70°c. find the friction torque and the power loss when the crankshaft rotates at 2900 rev/min.

Answers: 1

continue

Engineering, 06.07.2019 03:10, betru12315

How to convert a friction to decimal ?

Answers: 1

continue

Engineering, 06.07.2019 04:10, jessicajustice6215

Cold water (cp=4180j/kg k) leadıng to a shower enters a thin-walled double-pipe heat transfer at 15c at a rate of 0.25kg/s and is heated to 45c by hot water (cp=4190j/kg k) that enters at 100c at the rate of 3kg/s. if the overall heat transfer coefficient is 950w /m2 k , determıne the rate of heat transfer and the heat transfer surface area of the heat exchanger using e - ntu method

Answers: 1

continue

Do you know the correct answer?

Atruncated solid cone is of circular cross section, and its diameter is related to the axial coordin...