Convection, conduction, and overall u. a gas at 450 k is flowing inside a 2-in. steel pipe, schedule 40. the pipe is insulated with 51 mm of lagging having a mean k = 0.0623 w/m · k. the convective heat-transfer coefficient of the gas inside the pipe is 30.7 w/m2 · k and the convective coefficient on the outside of the lagging is 10.8. the air is at a temperature of 300 k. calculate the heat loss per unit length of 1 m of pipe using resistances. repeat, using the overall u0 based on the outside area a0.

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line

Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan