Engineering, 25.10.2019 01:43, 2024daisjavien

Asmooth, thin airfoil is to be tested in a wind tunnel. the airfoil chord length is 0.8 m. the airfoil surface is heated to a temperature of 55°c. the free stream air is at 25°c and has a velocity of 55 m/s. determine: a) h at 0.5 m from the leading edge, b) the average heat transfer coefficient for the entire chord length, and c) the heat transfer rate per meter of airfoil width (include upper and lower surfaces).

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, margaret1758

If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.

Answers: 1

continue

Engineering, 04.07.2019 18:10, ashleybaber4966

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79

Answers: 1

continue

Engineering, 04.07.2019 18:10, skpdancer1605

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Answers: 3

continue

Engineering, 04.07.2019 18:10, winterblanco

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

continue

Do you know the correct answer?

Asmooth, thin airfoil is to be tested in a wind tunnel. the airfoil chord length is 0.8 m. the airfo...