Engineering
Engineering, 25.10.2019 00:43, oliviastokes

Liquid water and water vapor (steam) are mixed in a mixing chamber to raise the temperature of water. the chamber has two inlets and a single exit and operates at steady state. the following data are provided at the two inlets and one exit. inlet-1 (state-1): p=500 kpa, t=30 deg-c, a = 0.01 m2, vel = 10 m/s, v=0.001004 m3/kg; inlet - 2: (state-2): water vapor at p =500 kpa, vel = 20 m/s, a = 0.1 m2, v = 0.376 m3/kg; exit (state-3): hot water at p= 500 kpa, v=0.0010 m3/kg, a = 0.01 m2

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, hadellolo8839
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
image
Engineering, 04.07.2019 18:10, QueenLife4869
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
image
Engineering, 04.07.2019 18:20, alexis9263
Have a greater impact on maintenance productivity than any other support group. (clo5) a)-the top management b)-inventory and purchasing c)-sub-contracting d)-cmms
Answers: 2
image
Engineering, 04.07.2019 18:20, miguel454545
Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.
Answers: 1
Do you know the correct answer?
Liquid water and water vapor (steam) are mixed in a mixing chamber to raise the temperature of water...

Questions in other subjects:

Konu
Mathematics, 12.04.2021 05:40