Engineering
Engineering, 23.10.2019 23:00, obeyal77

Vehicles begin to arrive at a parking lot at 6: 00 a. m. at a rate 8 per minute. due to an
accident on the access highway, no vehicles arrive from 6: 20 to 6: 30 a. m. from 6: 30 a. m.
on, vehicles arrive at a rate of 2 per minute. the parking lot attendant processes incoming
vehicles (collects parking fees) at a rate of 4 per minute throughout the day. assuming
d/d/1 queuing, determine:

a. maximum queue
b. avg vehicle delay

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, DestyHilBan1183
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
image
Engineering, 04.07.2019 18:10, alyssabailey7545
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
image
Engineering, 04.07.2019 18:10, aaliyah80
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
image
Engineering, 04.07.2019 18:10, 0436500
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Do you know the correct answer?
Vehicles begin to arrive at a parking lot at 6: 00 a. m. at a rate 8 per minute. due to an
acc...

Questions in other subjects: