Engineering, 23.10.2019 22:00, ronaldo22
Amodel test of a tractor-trailer rig is performed in a wind tunnel. the drag force, fd, is found to depend on the frontal area, a, wind speed, v, air density, r, and air viscosity, µ. the model scale is 1: 4 (e. g., 1 m in the model is equivalent to 4 m in the prototype), frontal area of the model is a = 0.625 m2 . a. obtain a set of dimensionless parameters suitable to characterize the model test results
Answers: 3
Engineering, 04.07.2019 18:10, soreese02
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
Engineering, 04.07.2019 18:10, Candi9697
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
Engineering, 06.07.2019 02:30, onlymyworld27
In a unit cell of fcc structure, indicate the position of one of the tetrahedral interstitial sites by plotting the corresponding tetrahedron. do the same for one of the octahedral interstitial sites (in a separate fcc unit cell). mark the positions of all the tetrahedral and octahedral interstitial sites in the unit cells. how many equivalent tetrahedral sites and how many equivalent octahedral sites are contained in a fcc unit cell, respectively. what is the coordination number for a tetrahedral site and what is the coordination number for an octahedral site?
Answers: 2
Engineering, 06.07.2019 03:10, brookealexis5768
Oxygen at 300 kpa and 400 k is in a closed system with an initial volume of 0.1 m3. is now compressed in a polytropic process, with exponent of n 1.2, to a temperature of 500 k. calculate: a) the boundary work done during the compression, in kj b) the heat transfer during the compression, in kj
Answers: 3
Amodel test of a tractor-trailer rig is performed in a wind tunnel. the drag force, fd, is found to...
History, 16.03.2020 06:04
Mathematics, 16.03.2020 06:04
English, 16.03.2020 06:05
Mathematics, 16.03.2020 06:07
English, 16.03.2020 06:07
Biology, 16.03.2020 06:07
Mathematics, 16.03.2020 06:08