Engineering, 23.10.2019 22:00, ggdvj9gggsc
Atank contains 21 kg of dry air and 0.3 kg of water vapor at 30°c and 100 kpa total pressure. determine (a) the specific humidity(b) the relative humidity (c) the specific enthalpy of the mixture in the tank as (kj/kg-mixture) (calculate by hand)(d) the specific enthalpy of the mixture in the tank as (kj/kg-dry air) (calculate by hand)(e) explain (in 1-2 sentences) the difference between the values in c and d – which value agrees with the enthalpy value in the psychrometric chart at this condition?
Answers: 3
Other questions on the subject: Engineering
Engineering, 03.07.2019 15:10, brooklyn674
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 04.07.2019 18:10, genyjoannerubiera
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
Engineering, 04.07.2019 18:20, maustin5323
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
Do you know the correct answer?
Atank contains 21 kg of dry air and 0.3 kg of water vapor at 30°c and 100 kpa total pressure. determ...
Questions in other subjects:
Geography, 29.01.2020 04:58
Chemistry, 29.01.2020 04:58
English, 29.01.2020 04:58
