Engineering
Engineering, 19.10.2019 01:30, halltristan657

Adesktop computer is to be cooled by a fan whose flow rate is 0.34 m3 /min. determine the mass flow rate of air through the fan at an elevation of 3400 m where the air density is 0.7 kg/m3 . also, if the average velocity of air is not to exceed 110 m/min, determine the diameter of the casing of the fan. (page 215).

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 15:10, theamandawhite
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
image
Engineering, 04.07.2019 18:10, mm016281
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit. explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
image
Engineering, 04.07.2019 18:10, 19deleonl
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
image
Engineering, 04.07.2019 18:20, maustin5323
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
Do you know the correct answer?
Adesktop computer is to be cooled by a fan whose flow rate is 0.34 m3 /min. determine the mass flow...

Questions in other subjects:

Konu
Mathematics, 14.06.2021 06:20
Konu
Mathematics, 14.06.2021 06:20
Konu
Mathematics, 14.06.2021 06:20