Engineering, 18.10.2019 22:30, Brainly264

Using the parity equations from question 4, calculate parity bits p1, p2, and p4 for the received code ‘10110110’ and determine which bit needs to be corrected. the bit order is {p1, p2, d1, p4, d2, d3, d4, ded}. 10 pts. hint: the failing bit can be determined by doing an exclusive or of the received parity and the calculated parity bits. for example, if the received parity for p4, p2, p1 is 0,0,1 and the calculated parity for p4, p2, p1 is 0,1,0, then a bit by bit xor would result in 0,1,1. converting 011 to decimal would be 3, indicating that the bit in position 3 needs to be corrected

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, heidiburgos1own6c0

Fluids at rest possess no flow energy. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:20, ashleyjaslin

Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.

Answers: 3

continue

Engineering, 04.07.2019 19:10, Calliedevore

The proportional limit is always greater than the yield strength for a material. a)-trune b)- false

Answers: 3

continue

Engineering, 04.07.2019 19:10, nida7864

An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed

Answers: 3

continue

Do you know the correct answer?

Using the parity equations from question 4, calculate parity bits p1, p2, and p4 for the received co...